Description
High Misalignment Spacers in Stainless Steel are a necessary component when using Rod Ends and trying to achieve maximum amounts of travel. Misalignment’s are measured by the hole size in a JMX16T Rod End or WSSX16T Uniball, Bolt size through the center of the Misalignment and the height of the Misalignment Spacer. Sold each. 2 are required per Rod End.
| Part # |
Heim joint hole |
MA bolt hole |
MA Height |
Total width |
| MA1.0X1/2X.687 | 1.0“ | 1/2″ | .687“ | 2.750 |
| MA1.0X5/8X.325 | 1.0“ | 5/8“ | .325“ | 2.125 |
| MA1.0X5/8X.500 |
1.0“ | 5/8“ | .500“ | 2.375 |
| MA1.0X5/8X.687#6 |
1.0“ | 5/8“ | .687“ | 2.750 |
| MA1.0X5/8X.812 | 1.0“ | 5/8“ | .812“ | 3.000 |
| MA1.0X3/4X.250 | 1.0“ | 3/4“ | .250“ | 1.865 |
| MA1.0X3/4X.315 | 1.0“ | 3/4“ | .315“ | 1.965 |
| MA1.0X3/4X.370 | 1.0“ | 3/4“ | .370“ | 2.125 |
| MA1.0X3/4X.625 | 1.0“ | 3/4“ | .625 | 2.625 |
| MA1.0X3/4X.687#7 | 1.0“ | 3/4“ | .687“ | 2.750 |
| MA1.0X3/4X.715 | 1.0“ | 3/4“ | .715“ | 2.800 |
| MA1.0X3/4X.750 | 1.0“ | 3/4“ | .750“ | 2.870 |
| MA1.0X3/4X.812 | 1.0“ | 3/4“ | .812“ | 3.000 |
| MA1.0X7/8X.250 | 1.0“ | 7/8″ | .250“ | 1.875 |
